Discover DH15 Diesel Heating System with Espar Hydronic HS3 D5E
Elevate your outdoor lifestyle with the DH15 Hydronic Heating System. Enjoy rapid hot water and effective air heating using Eberspacher's advanced D5E HS3 furnace and DH developed air heating blower.
Designed for tight areas, this space-saving and all 316 stainless steel van hydronic heating system comes composed, providing quick installation and around 3000 hours of service life for your camping, sailing, and off-grid adventures.
Compact Hydronic hot water system for camper van or boat
This system is designed to fit in tight spaces like small campers and boats. It heats up quickly, providing hot water for a sink or a continuous shower at a remarkable 0.66 gal/min in just 6 to 7 minutes from a cold start.
The ultra-compact hydronic hot water system also includes Watermark approved tempering valve and plate heat exchanger to ensure hot water is always delivered at safe temperatures.
Powerful Eberspacher D5E HS3 Hydronic furnace
The HS3 furnace by Eberspacher offers a power output ranging from 4,400 to 17,070 BTU and a coolant capacity of 3.96 gallons, ensuring optimal performance with minimal noise and power consumption, as well as improved water and dust resistance.
The furnace's advanced modulation technology eliminates excessive cycling, making it efficient and quiet, while its compact design integrates perfectly into the DH15 system. The D5E HS3 furnace drops to low power much faster, so it starts up more gently and quietly.
Efficient controllers for smooth operation
The hydronic heating system is equipped with an air blower unit and comes with two controllers. The EasyStart Pro controller is optional but you'll need it if you travel in high altitudes. It allows you to use the high-altitude setting, providing reliable heater operation and preventing carbon buildup.
The thermostat is used to control the air blower unit of the heater. If you are not planning to travel to higher altitudes, installing the EasyStart Pro controller is not necessary.
Easy installation and versatility
For hassle-free installation, the DH15 comes water-leak tested. The package includes the Eberspacher installation kit, featuring everything you need for a smooth setup: wiring, fuel line, exhaust, inlet air silencer, and connectivity to the DH thermostat. This hydronic hot water system can be used with both diesel and gasoline heater options.
The Eberspacher DH15 heating system is easy to install with basic tools. Key steps include mounting the furnace and coolant pump, cutting and securing hoses with clamps, and connecting the combustion air silencer. The setup is straightforward with clear instructions and included components.
Quiet performance and adaptability
Eberspacher DH15 hot water system is significantly quieter in terms of the combustion fan and overall noise levels. With the Eberspacher super quiet fuel pump, you won't hear a single ticking sound during operation.
When using fan heads for heating, they won't cycle if they produce over 4,400 BTU. Therefore, at a low power, they are as silent as an air heater.
The pre-assembled and tested hot water system includes:
- compact 3.96 gal / 15L hot coolant tank with integrated water heat plate exchanger
- mounting and installation accessories
- Fiberglass insulated tank
- Diesel Eberspacher Hydronic furnace with EasyStart Pro controller
- Air intake silencer
- Exhaust system with a silencer
- Floor mounting plate with silicone
- fuel pump and fuel line
- Air blower unit with Thermostat controller
Note: the system is not shipped with coolant. The purchaser is required to fill the tank using a standard automotive corrosion resisting coolant mix.
System Performance:
- Time to first usable hot water (from cold start) - 9 mins*
- Time to fully heated - 14 mins*
- Reheat time between showers - 7 mins
- Time that flow rates can be supported at 30°C* - 0.52 gal/min –>15 min , 0.79 gal/min – 13 min, 1.05 gal/min – 6 min, 1.32 gal/min – 2 min
- Long-term ‘indefinite’ flow rate - 0.52 gal/min at rise of 86°F
- Recommended shower head flow rate - 0.66 gal/min – 0.92 gal/min
*These numbers are all affected by ambient temperature, and installation layout and assume no concurrent air heating, so should be taken as a guide.
Technical Specifications:
- Voltage - 12V
- Power Output - 4,400 - 17,070 BTU (1.3 - 5 kW)
- Fuel - Diesel
- Power consumption - 5 – 32W
- Fuel consumption - 0.04 - 0.15 gal/h (0.15 – 0.59 l/h)
- Tank construction - 316 stainless steel
- Required space (W x H x D) - 17.72 x 12.60 x 13.39 in (450 x 320 x 340 mm)
- Approx. dry weight - 44.09b (20kg)
- Insulated tank - Yes, fiberglass
Ducted Fan Unit:
- Output - 5,462 BTU (1.6kW) output @ 20 degrees ambient; 6,145 BTU (1.8kW) output @ 10 degrees ambient
- Power - less than 2A on high
- Size (W x H x D) -8.6 x 6.1 x 15.3 in (220 x 155 x 390 mm) fan in vertical direction not including duct outlet
Dieselheat Thermostat:
- Power Consumption - < 3A
- Size - 3.4 x 3.4 in (86 x 86 mm)
Technical Specifications of the DH15 Diesel Heating System with Espar Hydronic HS3 D5E
- Fuel:
- Diesel
- Voltage:
- 12V
- Heater model:
- Hydronic 5
- Power output:
- 5 kW
Included in the kit:
Discover DH15 Diesel Heating System with Espar Hydronic HS3 D5E
Elevate your outdoor lifestyle with the DH15 Hydronic Heating System. Enjoy rapid hot water and effective air heating using Eberspacher's advanced D5E HS3 furnace and DH developed air heating blower.
Designed for tight areas, this space-saving and all 316 stainless steel van hydronic heating system comes composed, providing quick installation and around 3000 hours of service life for your camping, sailing, and off-grid adventures.
Compact Hydronic hot water system for camper van or boat
This system is designed to fit in tight spaces like small campers and boats. It heats up quickly, providing hot water for a sink or a continuous shower at a remarkable 0.66 gal/min in just 6 to 7 minutes from a cold start.
The ultra-compact hydronic hot water system also includes Watermark approved tempering valve and plate heat exchanger to ensure hot water is always delivered at safe temperatures.
Powerful Eberspacher D5E HS3 Hydronic furnace
The HS3 furnace by Eberspacher offers a power output ranging from 4,400 to 17,070 BTU and a coolant capacity of 3.96 gallons, ensuring optimal performance with minimal noise and power consumption, as well as improved water and dust resistance.
The furnace's advanced modulation technology eliminates excessive cycling, making it efficient and quiet, while its compact design integrates perfectly into the DH15 system. The D5E HS3 furnace drops to low power much faster, so it starts up more gently and quietly.
Efficient controllers for smooth operation
The hydronic heating system is equipped with an air blower unit and comes with two controllers. The EasyStart Pro controller is optional but you'll need it if you travel in high altitudes. It allows you to use the high-altitude setting, providing reliable heater operation and preventing carbon buildup.
The thermostat is used to control the air blower unit of the heater. If you are not planning to travel to higher altitudes, installing the EasyStart Pro controller is not necessary.
Easy installation and versatility
For hassle-free installation, the DH15 comes water-leak tested. The package includes the Eberspacher installation kit, featuring everything you need for a smooth setup: wiring, fuel line, exhaust, inlet air silencer, and connectivity to the DH thermostat. This hydronic hot water system can be used with both diesel and gasoline heater options.
The Eberspacher DH15 heating system is easy to install with basic tools. Key steps include mounting the furnace and coolant pump, cutting and securing hoses with clamps, and connecting the combustion air silencer. The setup is straightforward with clear instructions and included components.
Quiet performance and adaptability
Eberspacher DH15 hot water system is significantly quieter in terms of the combustion fan and overall noise levels. With the Eberspacher super quiet fuel pump, you won't hear a single ticking sound during operation.
When using fan heads for heating, they won't cycle if they produce over 4,400 BTU. Therefore, at a low power, they are as silent as an air heater.
The pre-assembled and tested hot water system includes:
- compact 3.96 gal / 15L hot coolant tank with integrated water heat plate exchanger
- mounting and installation accessories
- Fiberglass insulated tank
- Diesel Eberspacher Hydronic furnace with EasyStart Pro controller
- Air intake silencer
- Exhaust system with a silencer
- Floor mounting plate with silicone
- fuel pump and fuel line
- Air blower unit with Thermostat controller
Note: the system is not shipped with coolant. The purchaser is required to fill the tank using a standard automotive corrosion resisting coolant mix.
System Performance:
- Time to first usable hot water (from cold start) - 9 mins*
- Time to fully heated - 14 mins*
- Reheat time between showers - 7 mins
- Time that flow rates can be supported at 30°C* - 0.52 gal/min –>15 min , 0.79 gal/min – 13 min, 1.05 gal/min – 6 min, 1.32 gal/min – 2 min
- Long-term ‘indefinite’ flow rate - 0.52 gal/min at rise of 86°F
- Recommended shower head flow rate - 0.66 gal/min – 0.92 gal/min
*These numbers are all affected by ambient temperature, and installation layout and assume no concurrent air heating, so should be taken as a guide.
Technical Specifications:
- Voltage - 12V
- Power Output - 4,400 - 17,070 BTU (1.3 - 5 kW)
- Fuel - Diesel
- Power consumption - 5 – 32W
- Fuel consumption - 0.04 - 0.15 gal/h (0.15 – 0.59 l/h)
- Tank construction - 316 stainless steel
- Required space (W x H x D) - 17.72 x 12.60 x 13.39 in (450 x 320 x 340 mm)
- Approx. dry weight - 44.09b (20kg)
- Insulated tank - Yes, fiberglass
Ducted Fan Unit:
- Output - 5,462 BTU (1.6kW) output @ 20 degrees ambient; 6,145 BTU (1.8kW) output @ 10 degrees ambient
- Power - less than 2A on high
- Size (W x H x D) -8.6 x 6.1 x 15.3 in (220 x 155 x 390 mm) fan in vertical direction not including duct outlet
Dieselheat Thermostat:
- Power Consumption - < 3A
- Size - 3.4 x 3.4 in (86 x 86 mm)
Choosing Guide
Option Choosing Guide for this product is coming soon, please contact support@heatso.com if you need help picking the right options or have any questions.
Shipping
- United States - 1-5 Working Days
- United Kingdom - 2-5 Working Days
- European Union - 2-7 Working Days
- Australia / New Zealand - 5-14 Working Days
- Rest of World - 5-14 Working Days
There may be a delay if the order is shipped to a PO or parcel shop address. Please note, some couriers do not offer shipping to PO boxes.
View full shipping & Delivery information
Returns
You can return or exchange goods within 14 days from the date of purchase if the item is unused and brand new in unopened packaging. You must contact us before returning any goods, though. Additional deductions might be applied as indicated in the Returns section of our Terms and Conditions.
Warranty Information
Most heaters come with 2 year warranty + optional 1 year extended Warranty available
- Parts - 1 Year Warranty
- Refrigerators - 1 Year Warranty
- AC Systems - 1 Year Warranty
- Heavy duty heating equipment (10 kW+) - 1 Year Warranty
- Other items - 1 Year Warranty
Installation, servicing and maintenance must be done in accordance with manufacturers guidelines. Failure to follow these guidelines will result in voiding your warranty.
We provide free technical and installation support via email or phone to all of our customers who purchase a heater, heater kit or other products from Heatso. We take pride in our customer service and want to ensure that your heater system is properly installed. As a result, if you have any difficulties, please do not hesitate to contact us.
If you require removing and/or refitting your item, please visit a local professional or authorized specialist, if you can not find one you can contact us and we will try to recommend a local partner to assist with the task. The cost of removing and/or refitting this item is not covered by the warranty.
Customer reviews
Write a Review
