Effortless Marine Heating with Espar Airtronic L3 D6L Marine Heater Kit
This Espar Airtronic D6L 12v marine heater kit comes with everything you need for a completely new installation or as a changeover kit to upgrade your older Airtronic heater.
Espar D6L heater kit has a 90mm hot air outlet, therefore it can be used to replace any previous heater version with an existing 90mm system in your boat. A few examples of this would be D4 / D4L / D4R / D5 / D4L, D5LC / D7, or D8LC models.
Powerful Marine Diesel Heater Kit for Boats
Espar AL3 D6L Airtronic Marine Heater Kit delivers powerful, efficient heating for 26-32 ft motor yachts or 32-39 ft sailing yachts.
Installation kit without hot air tubing allows selection of desired outlet numbers. Additionally, different hot air tubing options are available. Moreover, a marine-grade fuel line and exhaust system with a silencer are included, as well as a digital controller with an integrated thermostat.
Customizable Installation Options
Depending on your installation requirements, you can choose from one of the available options. A basic kit includes all the mandatory and required components for a basic changeover if you're just replacing a heater.
For new installations, consider either 2 or 3 outlet systems. 2 outlet system is a 90mm outlet system with two outlets measuring 6 meters in length. The 3 outlet system has approximately 9 meters of ducting, 1 main 90mm outlet, and 2 closeable 75mm outlets. Contact us for custom solutions or choose one of the available options.
EasyStart Pro Controller for Precise Temperature Control
Control and schedule the heater's run-time down to the minute with EasyStart Pro controller. Furthermore, the controller includes an integrated thermostat for accurate temperature control.
The controller's installation location must be carefully chosen. Use our recommended extension for EasyStart Pro controllers, to have flexibility in installation.
Tailored intake and exhaust system
Among the key components of this 12v marine heater is the exhaust system, which meets the highest safety and comfort standards.
Integrated silencer reduces noise and in combination with air intake silencer, improves comfort. Following the installation guide will ensure that the heater works flawlessly. In addition, an adhesive aluminum sheet is added to catch hot water excess from the exhaust drain pipe.
Technical Specifications of the Espar Airtronic AL3 D6L Diesel 12V Heater Marine Kit with EasyStart Pro Controller
- Fuel:
- Diesel
- Voltage:
- 12V / 24V
- Max Power:
- 20473 BTU (6kW)
- Fuel consumption:
- 0.04 - 0.20 gal/h (0.16 - 0.74 l/h)
- Heater model:
- Airtronic D6
- Power output:
- 6kW
Included in the kit:
Effortless Marine Heating with Espar Airtronic L3 D6L Marine Heater Kit
This Espar Airtronic D6L 12v marine heater kit comes with everything you need for a completely new installation or as a changeover kit to upgrade your older Airtronic heater.
Espar D6L heater kit has a 90mm hot air outlet, therefore it can be used to replace any previous heater version with an existing 90mm system in your boat. A few examples of this would be D4 / D4L / D4R / D5 / D4L, D5LC / D7, or D8LC models.
Powerful Marine Diesel Heater Kit for Boats
Espar AL3 D6L Airtronic Marine Heater Kit delivers powerful, efficient heating for 26-32 ft motor yachts or 32-39 ft sailing yachts.
Installation kit without hot air tubing allows selection of desired outlet numbers. Additionally, different hot air tubing options are available. Moreover, a marine-grade fuel line and exhaust system with a silencer are included, as well as a digital controller with an integrated thermostat.
Customizable Installation Options
Depending on your installation requirements, you can choose from one of the available options. A basic kit includes all the mandatory and required components for a basic changeover if you're just replacing a heater.
For new installations, consider either 2 or 3 outlet systems. 2 outlet system is a 90mm outlet system with two outlets measuring 6 meters in length. The 3 outlet system has approximately 9 meters of ducting, 1 main 90mm outlet, and 2 closeable 75mm outlets. Contact us for custom solutions or choose one of the available options.
EasyStart Pro Controller for Precise Temperature Control
Control and schedule the heater's run-time down to the minute with EasyStart Pro controller. Furthermore, the controller includes an integrated thermostat for accurate temperature control.
The controller's installation location must be carefully chosen. Use our recommended extension for EasyStart Pro controllers, to have flexibility in installation.
Tailored intake and exhaust system
Among the key components of this 12v marine heater is the exhaust system, which meets the highest safety and comfort standards.
Integrated silencer reduces noise and in combination with air intake silencer, improves comfort. Following the installation guide will ensure that the heater works flawlessly. In addition, an adhesive aluminum sheet is added to catch hot water excess from the exhaust drain pipe.
Choosing Guide
Option Choosing Guide for this product is coming soon, please contact support@heatso.com if you need help picking the right options or have any questions.
Shipping
- United States - 1-5 Working Days
- United Kingdom - 2-5 Working Days
- European Union - 2-7 Working Days
- Australia / New Zealand - 5-14 Working Days
- Rest of World - 5-14 Working Days
There may be a delay if the order is shipped to a PO or parcel shop address. Please note, some couriers do not offer shipping to PO boxes.
View full shipping & Delivery information
Returns
You can return or exchange goods within 14 days from the date of purchase if the item is unused and brand new in unopened packaging. You must contact us before returning any goods, though. Additional deductions might be applied as indicated in the Returns section of our Terms and Conditions.
Warranty Information
Most heaters come with 2 year warranty + optional 1 year extended Warranty available
- Parts - 1 Year Warranty
- Refrigerators - 1 Year Warranty
- AC Systems - 1 Year Warranty
- Heavy duty heating equipment (10 kW+) - 1 Year Warranty
- Other items - 1 Year Warranty
Installation, servicing and maintenance must be done in accordance with manufacturers guidelines. Failure to follow these guidelines will result in voiding your warranty.
We provide free technical and installation support via email or phone to all of our customers who purchase a heater, heater kit or other products from Heatso. We take pride in our customer service and want to ensure that your heater system is properly installed. As a result, if you have any difficulties, please do not hesitate to contact us.
If you require removing and/or refitting your item, please visit a local professional or authorized specialist, if you can not find one you can contact us and we will try to recommend a local partner to assist with the task. The cost of removing and/or refitting this item is not covered by the warranty.
Customer reviews
Write a Review
