• Victron Energy MultiPlus Compact Inverter 24/3000/70-50 120V
  • Victron Energy MultiPlus Compact Inverter 24/3000/70-50 120V
  • Victron Energy MultiPlus Compact Inverter 24/3000/70-50 120V
  • Victron Energy MultiPlus Compact Inverter 24/3000/70-50 120V

Victron Energy

Victron Energy MultiPlus Compact Inverter 24/3000/70-50 120V

196,447.99JPY
136,001.99JPY
(Save  60,446.00JPY )

(Coming soon)

Shipping:
Calculated at Checkout
Availability:
Usually ships in 24 hours
  • Free Shipping in US
    on orders $499
  • 24/5 Customer Support
    Shop with an expert
  • Easy Returns
    14-day Returns
  • Free Shipping in US
    on orders $499
  • 24/5 Customer Support
    Shop with an expert
  • Easy Returns
    14-day Returns

Victron Energy MultiPlus Compact 24/3000/70-50 120V 60HZ Inverter system

Multifunctional, with intelligent power management

The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features.

Two AC Outputs
The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on models rated at 3kVA and more).

Virtually unlimited power thanks to parallel operation
Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three-phase and split phase capabilities.

Three phase capability
In addition to parallel connection, three units can be configured for three-phase output. But thats not all: with three strings of six parallel units a 45kW / 54kVA three phase inverter and 1260A charger can be built.

PowerControl – Dealing with limited generator, shore side or grid power
The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10A per 5kVA Multi at 230VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

PowerAssist – Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.

Four stage adaptive charger and dual bank battery charging
The main output provides a powerful charge to the battery system by means of advanced adaptive charge software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery (trickle charge output available on 12V and 24V models only).

System configuring has never been easier
After installation, the MultiPlus is ready to go. If settings have to be changed, this can be done in a matter of minutes with a new DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed! Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new, advanced, features

MultiPlus 120V Features:

  • Power Control
  • Power Assist
  • Transfer switch (A) 50A
  • Parallel and 3-phase operation

Inverter:

  • Input - 19-33 V volts DC
  • Output -  120 volts AC
  • Output frequency - 60 Hz 
  • Peak powr - 6000 Watts
  • Max efficiency -  93%
  • Zero load power 15 Watts

Charger:

  • Input voltage 95-140 Volts AC
  • Input frequency 45-65
  • Float charge voltage 13.8 volts
  • Storage charge voltage 13.2 volts
  • Charge current house battery 120 Amps
  • Charge current auxiliary battery 4 Amps
  • House battery temperature sensor

Dimensions:

  • 14.3 x 10.2 x 8.6 

Included in the kit:

Victron Energy MultiPlus Compact 24/3000/70-50 120V 60HZ Inverter system

Multifunctional, with intelligent power management

The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features.

Two AC Outputs
The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on models rated at 3kVA and more).

Virtually unlimited power thanks to parallel operation
Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three-phase and split phase capabilities.

Three phase capability
In addition to parallel connection, three units can be configured for three-phase output. But thats not all: with three strings of six parallel units a 45kW / 54kVA three phase inverter and 1260A charger can be built.

PowerControl – Dealing with limited generator, shore side or grid power
The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10A per 5kVA Multi at 230VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

PowerAssist – Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.

Four stage adaptive charger and dual bank battery charging
The main output provides a powerful charge to the battery system by means of advanced adaptive charge software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery (trickle charge output available on 12V and 24V models only).

System configuring has never been easier
After installation, the MultiPlus is ready to go. If settings have to be changed, this can be done in a matter of minutes with a new DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed! Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new, advanced, features

MultiPlus 120V Features:

  • Power Control
  • Power Assist
  • Transfer switch (A) 50A
  • Parallel and 3-phase operation

Inverter:

  • Input - 19-33 V volts DC
  • Output -  120 volts AC
  • Output frequency - 60 Hz 
  • Peak powr - 6000 Watts
  • Max efficiency -  93%
  • Zero load power 15 Watts

Charger:

  • Input voltage 95-140 Volts AC
  • Input frequency 45-65
  • Float charge voltage 13.8 volts
  • Storage charge voltage 13.2 volts
  • Charge current house battery 120 Amps
  • Charge current auxiliary battery 4 Amps
  • House battery temperature sensor

Dimensions:

  • 14.3 x 10.2 x 8.6 

Choosing Guide

Option Choosing Guide for this product is coming soon, please contact support@heatso.com if you need help picking the right options or have any questions.

Shipping

  • United States - 1-5 Working Days
  • United Kingdom - 2-5 Working Days
  • European Union - 2-7 Working Days
  • Australia / New Zealand - 5-14 Working Days
  • Rest of World - 5-14 Working Days

There may be a delay if the order is shipped to a PO or parcel shop address. Please note, some couriers do not offer shipping to PO boxes.

View full shipping & Delivery information

Returns

You can return or exchange goods within 14 days from the date of purchase if the item is unused and brand new in unopened packaging. You must contact us before returning any goods, though. Additional deductions might be applied as indicated in the Returns section of our Terms and Conditions.

View full Returns & Refunds information

Warranty Information

Most heaters come with 2 year warranty + optional 1 year extended Warranty available

  • Parts - 1 Year Warranty
  • Refrigerators - 1 Year Warranty
  • AC Systems - 1 Year Warranty
  • Heavy duty heating equipment (10 kW+) - 1 Year Warranty
  • Other items - 1 Year Warranty

Installation, servicing and maintenance must be done in accordance with manufacturers guidelines. Failure to follow these guidelines will result in voiding your warranty.

We provide free technical and installation support via email or phone to all of our customers who purchase a heater, heater kit or other products from Heatso. We take pride in our customer service and want to ensure that your heater system is properly installed. As a result, if you have any difficulties, please do not hesitate to contact us.

If you require removing and/or refitting your item, please visit a local professional or authorized specialist, if you can not find one you can contact us and we will try to recommend a local partner to assist with the task. The cost of removing and/or refitting this item is not covered by the warranty.

View full warranty Information

Customer reviews

(3 reviews) 5 out of 5 Write a Review
  • two words - fast shipping

    Posted by Tony on 9th Jun 2021

    5

    Thank you guys! arrived next day as promised!!

  • 2nd one

    Posted by Deborah on 8th Jun 2021

    5

    Arrived fast thank you. Had this in my first van. Very satisfied. Good deal

  • Quality

    Posted by Andrea Smith on 8th May 2021

    4

    I appreciate this is the best model.

  • Description

  • Kit Includes

  • Shipping & Returns

Related Products

In Stock

()

In Stock

()

In Stock

()

In Stock

()

In Stock

()

In Stock

()

In Stock

()

In Stock

()

In Stock

()

Customers Also Viewed